Rollover Gantry Bus Wash in 2023

A bus is being washed with rotating brushes at an automated vehicle wash station.

A rollover gantry bus wash is a type of automated vehicle wash system designed specifically for cleaning buses. This system is commonly used in bus depots, transit companies, and transportation facilities to efficiently and effectively clean buses in a consistent and automated manner.

Rollover Gantry Bus Wash Features

Here are some key features and aspects of a rollover gantry bus wash:

  1. Rollover Mechanism:
    The term “rollover” refers to the way the bus is positioned during the washing process. In a rollover gantry bus wash, the bus typically enters the washing area and then comes to a stop. A gantry system with multiple cleaning brushes or nozzles is positioned above and around the bus. The gantry then moves over the bus, rolling over it to clean all sides of the vehicle.
  2. Multiple Cleaning Stages:
    These bus wash systems typically incorporate several cleaning stages, including pre-soaking, scrubbing, high-pressure rinsing, and waxing. Pre-soaking helps loosen dirt and grime, while the scrubbing stage uses rotating brushes or high-pressure nozzles to physically remove dirt and contaminants from the bus’s exterior. High-pressure rinsing and waxing stages follow to rinse away soap residue and apply a protective wax coating.
  3. Automated Operation:
    Rollover gantry bus wash systems are fully automated, reducing the need for manual labor. Operators can control the wash process through a computerized control panel, allowing for customization of the cleaning program and adjustments for different bus sizes and types.
  4. Water Recycling:
    Many modern bus wash systems are designed to recycle and filter water, making them more environmentally friendly and cost-effective. Recycling systems capture and treat the water used during the wash process, removing contaminants and allowing the water to be reused for subsequent washes.
  5. Safety Features:
    These systems are equipped with safety features to ensure the protection of both the bus and the wash equipment. Sensors and interlocks help prevent collisions, and emergency stop mechanisms are in place to halt the process if necessary.
  6. Speed and Efficiency:
    Rollover gantry bus washes are designed for efficiency, capable of washing multiple buses per hour. This makes them well-suited for bus fleets that require frequent cleaning to maintain a professional appearance and ensure passenger safety.
  7. Maintenance:
    Regular maintenance is essential to keep the equipment in good working condition. This includes cleaning and replacing brushes, checking for wear and tear, and maintaining the water recycling system.

Overall, rollover gantry bus wash systems are a convenient and effective way to maintain the cleanliness and appearance of buses while also promoting water conservation and reducing the environmental impact of vehicle washing.

LazrTek Rollover Gantry

Rollover Gantry Bus Wash 2 | LazrTek

Limited Driver judgment is eliminated with gantry bus wash systems.

Gantry-style wash equipment, where the vehicle remains fixed while the brushes move around it, is a viable option for school bus fleets, according to LazrTek. “A gantry style system gives you a reliable and consistent wash outcome with the mirror setup on buses,” Evans explains. “The driver is not left to make any decisions.”

LazrTek’s gantry technology cleans all bus sections using two vertical brushes and one horizontal brush. A LazrTek Gantry system washes around mirrors to prevent damage, and programmable logic controller technology constantly monitors and changes brush pressures to deliver a consistent wash.

LazrTek’s gantry bus wash systems are low maintenance, even in wet environments. “Instead of chains and air cylinders, we employ belts and wagons, which considerably minimizes system maintenance.”

Each wash takes roughly five minutes with the system. A LazrTek Gantry Bus Wash system installed is around $100,000.

The LazrTek wash system offers a range of key features and benefits that make it the ideal choice for fleet maintenance:

  1. Efficient Cleaning:
    The high-pressure water jets and specialized brushes work together to remove dirt, grime, and debris from every nook and cranny of your vehicles. The system ensures a consistent and thorough cleaning, leaving your fleet looking spotless.
  2. Time-saving Automation:
    With LazrTek, you can say goodbye to manual labor and hello to time-saving automation. The system is designed to streamline the cleaning process, allowing you to clean multiple vehicles at once, significantly reducing the time required for maintenance.
  3. Enhanced Longevity:
    The LazrTek wash system not only cleans your vehicles but also helps protect them from harmful elements. Regular cleaning with LazrTek can prevent dirt buildup, rust, and corrosion, extending the lifespan of your fleet and reducing the need for frequent repairs and replacements.
  4. Eco-Friendly Solution:
    LazrTek is committed to environmental sustainability. The wash system uses biodegradable detergents and water recycling technology, minimizing water consumption and reducing the environmental impact of fleet maintenance.

It is well known clean equipment lasts longer and gives the public a better image of the ISD. To learn the best bus wash for your transportation fleet: Call Lazrtek (469)-536-8478

Get a Free Consultation

Our knowledgeable staff will help you determine the best equipment for your fleet.

By clicking “Give us a call”, I consent to being contacted by a representative of Lazrtek.